Overview
Zinsser DIF Wallpaper Stripper will strip wallcoverings quickly and reliably. DIF takes the fuss out of remove old wallpaper as it’s unique formulation which contains enzymes has an effective blend of wetting agents that speeds penetration of the wallpaper and resolubilization of the paste. DIF requires no steamers, one coat application, works in a matter of minutes, and unlike ordinary wallpaper remover solution reduces a bulid up of paste. Application can be done with a brush, roller or sprayer to really speed up your project.
- Removes residual paste
- Easy to use and apply
- Non-toxic, mildly scented, safe to use
- Highly effective on all types of wallpaper
| Area | Interior |
| Recommended Use | All types of wallpapers that cannot be effectively peeled or dry-stripped from the walls. |
| Coverage | 1 Litre makes 12 Litres |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush, Roller or Sprayer |
Preparation
- For washable/coated wallpaper, vinyl, foil or painted wallpapers
- Any wallpapers that are coated with a vinyl or acrylic or have been painted over should be scored with to enhance penetration
- Score the paper from the ceiling to the floor, using just enough force to break through the surface of the wallpaper
Application
Always test a small area to ensure you are happy with the finished results.
- Before application, carpet, floors and furniture should be protected from over spray or splatter
- Application can be done with a roller or sprayer, including garden sprayers. (Do not use fine mist sprayers)
- Add 400ml to 5 Litres of warm water
- Apply to the wall immediately
- Wait 15 minutes and repeat application
- Rewet a small section & scrape off loose wallpaper using a wallpaper scrapper
- To remove residual adhesive reapply
- Wait 15 minutes then scrape or sponge off
- Finally rinse with clean water
Note: Always follow the manufacturer instructions found on the tin.
